Non-standard hydraulic station introduction to non-standard hydraulic system
The pressure station, also known as the hydraulic pump station, is the hydraulic power source for the execution of the machine. It supplies oil according to the requirements of the drive unit (main unit) and controls the direction, pressure and flow of the oil flow. It is suitable for various types of separation between the main unit and the hydraulic unit. Under hydraulic machinery. After the user purchases, the hydraulic station can be connected to the actuator (cylinder and oil motor) on the main engine by the oil pipe, and the hydraulic machine can realize various prescribed actions and work cycles. The hydraulic station is a combination of pump unit, manifold or valve combination, fuel tank and electrical box. The functions of each component are as follows: Pump unit - equipped with motor and oil pump, it is the power source of the hydraulic station, which converts mechanical energy into the power of hydraulic oil. The integrated block is made up of a combination of hydraulic valves and channel bodies. It regulates the direction, pressure and flow of hydraulic oil. Valve combination - the plate valve is mounted on the vertical plate, and the rear plate connection is the same as the integrated block. Oil tank - is a semi-closed container welded by steel plate. It is also equipped with oil filter net, air filter, etc. It is used for oil storage, oil cooling and filtration. Electrical box - in two forms. A terminal board for setting an external lead; one is equipped with a complete set of control appliances. The working principle of the hydraulic station is as follows: the motor drives the oil pump to rotate, the pump draws oil from the oil pump, and converts the mechanical energy into the pressure energy of the hydraulic oil. The hydraulic oil is hydraulically operated by the integrated block (or valve combination) to achieve direction, pressure and flow. After adjustment, it is transmitted to the hydraulic cylinder or oil motor through the external pipeline, thus controlling the change of the direction of the liquid engine, the magnitude of the force and the speed, and promoting the work of various hydraulic machines.
Main use: Provide power for punching and stretching of machine tools.
System features: 1, classic high and low pressure hydraulic control system, energy saving and environmentally friendly green design.
2, rigorous design to ensure high energy efficiency.
3, low noise, to prevent leakage.
4, the main components are internationally renowned brands, safe and stable system will road.
5, compact structure, powerful power, high punching frequency.
6, all components to ensure good interchangeability, to ensure high machine operating rate.